Industrial RO Panels, RO Panel, Water ATM Panels, Water ATM RO Units, Water Vending Machines, Coin Type,Water ATM With RFID Interface, Industrial RO Controllers With GSM 33M, 11M, 13M And 11MR, Automatic RO Panel, Panels For Automatic RO Plant, RO Control Panel, PLC Panels For RO, RO Plant Automation, Water Controllers, Submersible Pump Starter Panels, 1P 2M, 33M, 1P 3M, Submersible Starters, Pump Motor Protection Panels, TDS Conductivity Meters, Chiller / Heat Pump Controllers, Manufacturer, Exporter, Supplier, Proton Power Control, Pune, Maharashtra, India



    We have been engaged in design; manufacture and marketing of pump motor protection panels for more than a decade. The range varies from low HP pumps to Higher HP pumps. Since these applications largely involved water pumps for various applications, like level control etc, it was natural for us to extend our expertise to water treatment and related controls. We thus have been manufacturing pump starter panels, catering to water filtration plants, especially having compatibility with widely used Multi Port Valves for Sand, Carbon, Softeners and third party Water controllers for over 3 years. Having understood the intricacies of water treatment industry, we then went on to develop Water controllers and are offering different models depending upon the complexity of the Water plants. These range from small Water plants to large Water plants. These Water controllers are designed around latest state of the art technology microcontrollers. We offer models having connectivity all crucial instruments that are used in Water filtration.



  • Dosing Pumps Item Preview Quick View
    • Product 1

    Electromagnatic Metering Dosing Pumps

  • Water ATM Card Type Item Preview Quick View
    • Product 1

    Water ATM Card Type

    Suited for all size RO plants
    Automation Philosophy: The Proton Automatic Dispenser, delivers water to an individual by his placing the RFID card (Smart Card) on the Proton ATM Controller on the dispenser panel. Controller opens the solenoid valve to dispense a set batch of water Automatic Dispensing Machine provides for initialising a set of RFID cards and then charging them with an amount to be spent for getting a predefined batches of water. An RFID card can be initialised from the Proton Water ATM controller. A set of RFID cards can be initialised so that they are recognised by a particular set of Proton ATM Controllers only. Thus avoiding inter vendor usage. An individual card then can be charged with an amount in Rupees through the Proton ATM controller. On receiving a batch of water from the Dispenser, an amount set per batch is deducted from the RFID card, as soon as it is presented to the controller. The controller notifies if the water level in the feed tank is low or if the charge left in the card is inadequate. The controller has an auto calibration function, where a unit batch (1 litre) can be calibrated with the help of known capacity containers of 1, 2 ,5 , 10 or 20 litres. Controller stores the data of amount of water dispensed and total charges made, date wise for a period of month.

  • Water ATM Coin Type Item Preview Quick View
    • Product 1

    Water ATM Coin Type

    Suited for all size RO plants
    System Description: The system comprises of state of the art technology, IP65 panel mounted Water ATM controller, internally mounted Flow Sensor, a 12 VDC (230VAC optional)solenoid valve and suitable piping with convenient external inlet and outlet connections. Water ATM controller has a 2.8 inch LCD display along with 5 nos. of programming keys. This facilitates selection and navigation through the menu driven setting options. The controller also features built in RFID reader/writer, Real Time Clock, Pulse type Flow Sensor interface, control output for Solenoid Valve.

  • Water ATM Card & Coin Type Item Preview Quick View
    • Product 1

    Water ATM Card & Coin Type

    Suited for all size RO plants
    Automation Philosophy: The Proton Automatic Dispenser, delivers water to an individual by his placing the RFID card (Smart Card) on the Proton ATM Controller on the dispenser panel. Controller opens the solenoid valve to dispense a set batch of water Automatic Dispensing Machine provides for initialising a set of RFID cards and then charging them with an amount to be spent for getting a predefined batches of water. An RFID card can be initialised from the Proton Water ATM controller. A set of RFID cards can be initialised so that they are recognised by a particular set of Proton ATM Controllers only. Thus avoiding inter vendor usage. An individual card then can be charged with an amount in Rupees through the Proton ATM controller. On receiving a batch of water from the Dispenser, an amount set per batch is deducted from the RFID card, as soon as it is presented to the controller. The controller notifies if the water level in the feed tank is low or if the charge left in the card is inadequate. The controller has an auto calibration function, where a unit batch (1 litre) can be calibrated with the help of known capacity containers of 1, 2 ,5 , 10 or 20 litres. Controller stores the data of amount of water dispensed and total charges made, date wise for a period of month.

  • IRO 11M Item Preview Quick View
    • Product 1

    IRO 11M

    Suited for Medium size RO plants
    RWP:1 Phase, HPP:1 and 3 Phase
    Preprogrammed RO operation, process interlocks and time delays. Interactive Auto RO operation through panel keys in case of faults.
    Provides operation with Automatic Multi-Port valves Plant RUN time display Flow Rate / Cumulative Volume display (Optional).
    Conductivity display with pre-alarm and trip settings. Easy User Programmable Settings. Password Protected Process and Electrical Parameter Settings.
    4 Key Interface and LCD for Control and Onsite Programming. Process Status Message Display. Alarm/Fault Message Display.
    Front Panel LED indications for active devices. Auto / Manual Operation. Pump Motor Voltage / Current display and Pump Motor Protection.
    Pump Protection in Manual Mode. Compact, Panel Mounting.
    Rugged and Reliable.

  • IRO With GSM Item Preview Quick View
    • Product 1

    IRO With GSM

    Suited for all size RO plants
    RWP:1 and 3 Phase, HPP:1 and 3 Phase
    Preprogrammed RO operation, process interlocks and time delays. Interactive Auto RO operation through panel keys in case of faults.
    Provides operation with Automatic Multi-Port valves Plant RUN time display Flow Rate / Cumulative Volume display (Optional).
    Conductivity display with pre-alarm and trip settings. Easy User Programmable Settings. Password Protected Process and Electrical Parameter Settings.
    4 Key Interface and LCD for Control and Onsite Programming. Process Status Message Display. Alarm/Fault Message Display.
    Front Panel LED indications for active devices. Auto / Manual Operation. Pump Motor Voltage / Current display and Pump Motor Protection.
    Pump Protection in Manual Mode. Compact, Panel Mounting.
    Rugged and Reliable.

  • IRO 33M Item Preview Quick View
    • Product 1

    IRO 33M

    Suited for Big size RO plants
    RWP:3Phase, HPP:3Phase
    Preprogrammed RO operation, process interlocks and time delays. Interactive Auto RO operation through panel keys in case of faults.
    Provides operation with Automatic Multi-Port valves Plant RUN time display Flow Rate / Cumulative Volume display (Optional).
    Conductivity display with pre-alarm and trip settings. Easy User Programmable Settings. Password Protected Process and Electrical Parameter Settings.
    4 Key Interface and LCD for Control and Onsite Programming. Process Status Message Display. Alarm/Fault Message Display.
    Front Panel LED indications for active devices. Auto / Manual Operation. Pump Motor Voltage / Current display and Pump Motor Protection.
    Pump Protection in Manual Mode. Compact, Panel Mounting.
    Rugged and Reliable.

  • IRO 11MP-SP Item Preview Quick View
    • Product 1

    IRO 11MP-SP

    Suited for Medium size RO plants
    RWP:1 Phase, HPP:1 and 3 Phase
    Preprogrammed RO operation, process interlocks and time delays. Interactive Auto RO operation through panel keys in case of faults.
    Provides operation with Automatic Multi-Port valves Plant RUN time display Flow Rate / Cumulative Volume display (Optional).
    Conductivity display with pre-alarm and trip settings. Easy User Programmable Settings. Password Protected Process and Electrical Parameter Settings.
    4 Key Interface and LCD for Control and Onsite Programming. Process Status Message Display. Alarm/Fault Message Display.
    Front Panel LED indications for active devices. Auto / Manual Operation. Pump Motor Voltage / Current display and Pump Motor Protection.
    Pump Protection in Manual Mode. Compact, Panel Mounting.
    Rugged and Reliable.

  • IRO 11BL Item Preview Quick View
    • Product 1

    IRO 11BL

    Suited for Medium size RO plants
    RWP:1 Phase, HPP:1 and 3 Phase
    Preprogrammed RO operation, process interlocks and time delays. Interactive Auto RO operation through panel keys in case of faults.
    Provides operation with Automatic Multi-Port valves Plant RUN time display Flow Rate / Cumulative Volume display (Optional).
    Conductivity display with pre-alarm and trip settings. Easy User Programmable Settings. Password Protected Process and Electrical Parameter Settings.
    4 Key Interface and LCD for Control and Onsite Programming. Process Status Message Display. Alarm/Fault Message Display.
    Front Panel LED indications for active devices. Auto / Manual Operation. Pump Motor Voltage / Current display and Pump Motor Protection.
    Pump Protection in Manual Mode. Compact, Panel Mounting.
    Rugged and Reliable.

  • Automatic Multiport Valve Item Preview Quick View
    • Product 1

    Automatic Multiport Valves

    Suited for Medium size RO plants
    RWP:1 Phase, HPP:1 and 3 Phase
    Preprogrammed RO operation, process interlocks and time delays. Interactive Auto RO operation through panel keys in case of faults.
    Provides operation with Automatic Multi-Port valves Plant RUN time display Flow Rate / Cumulative Volume display (Optional).
    Conductivity display with pre-alarm and trip settings. Easy User Programmable Settings. Password Protected Process and Electrical Parameter Settings.
    4 Key Interface and LCD for Control and Onsite Programming. Process Status Message Display. Alarm/Fault Message Display.
    Front Panel LED indications for active devices. Auto / Manual Operation. Pump Motor Voltage / Current display and Pump Motor Protection.
    Pump Protection in Manual Mode. Compact, Panel Mounting.
    Rugged and Reliable.

  • Digital Flow Meters Item Preview Quick View
    • Product 1

    Digital Flow Meters

  • Conductivity Meter with Sensor Item Preview Quick View
    • Product 1

    TDS / Conductivity Meters With Sensor

    ser can select measurements either conductivity or TDS . Pressing SET key will change the controller from run mode to set mode. In the set mode user can select conductivity or TDS measurements. After the selection set menu shows setting for the same. User can change the following parameters using INC/DEC key and SET key. If conductivity/ TDS goes beyond the High alarm set point Display will show C-HI/t-HI Message. And if conductivity goes beyond the Conductivity High set point then Relay will trip. Sense time is provided for relay to trip.

  • PSP 11MR Item Preview Quick View
    • Product 1

    PSP 11MR

    The RO Control cum Starter Panel is a Micro Controller based solid state compact unit. It measures Mains Voltage and Currents at Raw Water Pump (RWP) and High Pressure Pump (HPP). It provides Over and Under Voltage protection as well as Overload and Under Load (Dry Run) protection for both the pump motors. Voltage and Current protection settings are user settable with a password protection. Process interlocks like Low Pressure at HPP suction, High Pressure at HPP delivery and Product Tank Level High are pre-programmed for reliable operation of the plant. Controller also provides Flush Valve Solenoid and Dosing Pump power control. Low Pressure trip delay and Flush timings are settable. All the electrical trip delay timings are settable.
    Front panel LEDs indicate, Electrical Fault, Process Operation/ Alarm, Status of Pumps, Flush Valve and Manual Mode. At startup, power on delay is executed with blinking lamp test

  • Pressure Gauge Item Preview Quick View
    • Product 1

    Pressure Gauges

  • Flow Switches Item Preview Quick View
    • Product 1

    Flow Switches

  • Flow Meter Item Preview Quick View
    • Product 1

    Flow Meters

  • IRO Star Delta Panel Item Preview Quick View
    • Product 1

    IRO Star Delta Panels

  • Submersible PSP Item Preview Quick View
    • Product 1
    Submersible PSP

    The dual pump starter panel is state of the art Micro Controller based. It measures Voltage and currents of both the pumps. It has user settable Over and Under Voltage protections. It provides for settable Overload, Under-load (Dry run) and phase unbalance protections as well.
    In addition phase reversal and single phase protections are also provided. It also provides for by-passing of certain protections if not desired.

  • PSP 1P 2M Item Preview Quick View
    • Product 1
    PSP 1P 2M

    The dual pump starter panel is state of the art Micro Controller based. It measures Voltage and currents of both the pumps. It has user settable Over and Under Voltage protections. It provides for settable Overload, Under-load (Dry run) and phase unbalance protections as well.
    In addition phase reversal and single phase protections are also provided. It also provides for by-passing of certain protections if not desired.

  • PSP 33M Item Preview Quick View
    • Product 1

    PSP 33M

    The dual pump starter panel is state of the art Micro Controller based. It measures Voltage and 3 phase currents of both the pumps. It has user settable Over and Under Voltage protections. It provides for settable Overload, Under-load (Dry run) and phase unbalance protections as well.
    In addition phase reversal and single phase protections are also provided. It also provides for by-passing of certain protections if not desired.

  • PSP 1P 3M Item Preview Quick View
    • Product 1

    PSP 1P 3M

    The dual pump starter panel is state of the art Micro Controller based. It measures Voltage and currents of both the pumps. It has user settable Over and Under Voltage protections. It provides for settable Overload, Under-load (Dry run) and phase unbalance protections as well.
    In addition phase reversal and single phase protections are also provided. It also provides for by-passing of certain protections if not desired.

  • Single Phase Chiller Controller Item Preview Quick View
    • Product 1

    Single Phase Chiller Controllers

    1.Under normal working condition at power on after delay of 1 min.FAN1 will Start (ON),after 2 mins.FAN2 Starts(ON),after 3 min delay Compressor will Starts(ON).
    2.While compressor is ON,if HP,LP,OL occurs then Compressor and FAN2 will be Shut Down(OFF).
    3.IF UV /OV occurs then Both FANs and compressor will be Shut Down(OFF).

  • Three Phase Chiller / Heat Pump Controllers Item Preview Quick View
    • Product 1

    Three Phase Chiller / Heat Pump Controllers

    1.Under normal working condition at power on after setteble ON delay Pump & Compressor will Start
    2.While compressor is ON,if HP,LP,Flow Fault occurs then Cmpressor will shut down(OFF).
    3.IF UV /OV,UL/OL occurs then Both Pump and compressor will shut down(OFF)
    4.If unit in Chiller mode then If temp.goes above setpoint compressor will Start & vice versa.
    If unit in a Heat Pump mode then If temp.goes below setpoint compressor will start & vice versa.