- Supply : 3 Phase 415 VAC, 50 Hz (R, Y, B & N) (No auxiliary supply).
- Input volt Range : 200 V to 500 V.
- Input Currant Range : 00.0 A to 5.00 A.
- Input Freq Range : 40.00 Hz to 60.00 Hz.
- Resolution :
Voltage - 0.1 V
Current - 0.01 A
Frequency - 0.01 Hz
PF - 0.01
KW, KWA, KWh
- Display : 12 Digits 0.5”, bright RED 7 sag. LED
- Cutout dimensions : 92 mm X 92 mm X 75 mm
- Working : DISPLAY
VAF meter displays the parameters in following order
1. Phase to Phase Voltage with 0.1 V resolution Phase to phase Voltage LED ON(V P-P) and show
R-Y Voltage ---1 Row
Y-B Voltage ---2 Row
B-R Voltage ---3 Row
2. Phase to Neutral Voltage with 0.1 V resolution Phase to neutral Voltage LED ON (V L-N) and show
R-N Voltage ---1 Row
Y-N Voltage ---2 Row
B-N Voltage ---3 Row
3. Current with 0.01 A resolution Current LED ON (A) and show
R Phase current ---1 Row
Y Phase current ---2 Row
B Phase current ---3 Row
4. Frequency with 0.01 Hz resolution Frequency LED ON (Hz) and show
R Phase frequency ---1 Row
Y Phase frequency ---2 Row
B Phase frequency ---3 Row
5. Power Factor with 0.01 resolution Power Factor LED ON (PF) and show
R Phase Power Factor ---1 Row
Y Phase Power Factor ---2 Row
B Phase Power Factor ---3 Row
6. KW
KW LED ON (KW) and show
R Phase KW ---1 Row
Y Phase KW ---2 Row
B Phase KW ---3 Row
7. KVA
KVA LED ON (KVA) and show
R Phase KVA ---1 Row
Y Phase KVA ---2 Row
B Phase KVA ---3 Row
8. KWH
KWH LED ON (KWH) and show
KWH ---1-3 Row
SET MODE
To enter the Set mode press SET key.
1. Enter password. Default password for CT Ratio = 5 and Reset KWH =15.
2. After correct password enter press SET key to view and edit parameters.
3. Editing parameters are CT Ratio, CT ADD, CT DEL and reset KWH.
4. While editing in set mode if no key is pressed, the set mode will exit automatically and go into scroll mode.
5. In the scroll mode display can be display RY, Y-B, B-R P-N voltages, currents, frequencies, Power factor, KW, KWA, KWH indication by respective LED.
6. Parameters can be initialized with default values by press INC key.
7. In the scroll mode display can be display R-Y, Y-B, B-R P-N voltages, currents and frequencies indication by respective LED.
8. Parameters can be initialized with default values by press INC key.
- Standard DIN Enclosure
