- Controls 2 Single Phase Air Conditioners
- Precise Temperature sensing by accurate temperature sensor.
- Time Sharing for Compressors to share load equally.
- Voltage protections for each compressor.
- Separate alarm relay contacts for Room temperature High.
- Separate alarm relay contacts for Sensor Fail.
- Separate alarm relay contacts for OV/UV.
- Hour counters for Compressor ON Period to check its reliability.
- Display of all the A/C parameters & fault messages continuously in a Scrolling manner.
- Controls 2 Air Conditioners.
- Separate Phase Supply for each A/C.
- Bright Red 4 Digit LED Display.
- Precise Temperature sensing by accurate temperature sensor.
- Time Sharing for Compressors to share load equally.
- Voltage protections for each compressor.
- Separate alarm relay contacts for Room temperature High.
- Separate alarm relay contacts for Sensor Fail.
- Separate alarm relay contacts for OV/UV.
- Hour counters for Compressor ON Period to check its reliability.
- Display of all the A/C parameters & fault messages continuously in a Scrolling manner.
- Display Hold Feature by using ENTER Key. Press it again to release the hold.
- Various set points are settable through function mode categories:
- Password Protection.
- Sensor Fail Mode to keep ON & OFF cycle of one of the A/C through Sensor fail ON/OFF Time settings.
- LED Indications to observe the status.
- Controls two air conditioners
- Separate Phase Supply for each A/C
- Bright Red 4 Digit LED Display
- Accurate Temperature sensing by precise temperature sensor
- Time Sharing for Compressors to share load equally
- Voltage & Current protections for each compressor
- Separate alarm relay contacts for AC Fail
- Separate alarm relay contacts for Room High
- Hour counters for Compressor ON Period to check its reliability
- Display of all the A/C parameters & fault messages continuously in a scrolling manner
- Display Hold Feature
- 12. Various set points are settable through the following menus: a) SET b) DLAY c) OFST d) RSET
- Password Protection for all the settings
- Sensor Fail Mode to keep ON & OFF cycle of one of the time settings
- Auto (with all protections)/Manual (without protection) Modes
- Controller Bypass feature by provision of Switch on Front Panel
- LED Indications to observe the status
