Water ATM Panels, Water ATM RO Units, Water Vending Machines, Coin Type, Water ATM With Coin Acceptor, Water ATM Controllers, Automatic Water Dispensing Units, Automatic Water Dispensing Machines, Manufacturer, Exporter, Supplier, Proton Power Control, Pune, Maharashtra, India

Water ATM : Coin type, Model:1c

System Description:
The system comprises of state of the art technology, IP65 panel mounted Water ATM controller, internally mounted Flow Sensor, a 12 VDC (230VAC optional)solenoid valve and suitable piping with convenient external inlet and outlet connections. Water ATM controller has a 2.8 inch LCD display along with 5 nos. of programming keys. This facilitates selection and navigation through the menu driven setting options. The controller also features built in RFID reader/writer, Real Time Clock, Pulse type Flow Sensor interface, control output for Solenoid Valve.

  • Supply voltage : 90-270 VAC / DC.
  • Solenoid :12VDC / 230VAC (Internal or External)
  • Flow Sensor:Pulse Type
  • Level Sensing: Treated Water Level Floaty
  • Display: 2.8" TFT (Monochrome)
  • Programming Keys: 5
  • Water Inlet Connection: 3⁄4” Solvent Cementable
  • Water Outlet Connection: 3⁄4” Solvent Cementable.
  • Water Column : 1 m (min)
  • Environmental:
    1. Working Temp : 0 to 55º C
    2. Storage Temp : -5 to 70º C
    3. Relative humidity : 0 – 95 % Non-Condensing
    4. Warm up time : 10 Sec
  • Enclosure:
    1. Mounting : Wall mounting.
    2. Dimensions : 300 (W) X 350(H) X 190 (D) mm.
    All dimensions are in mm.

 

  • L1 : Green LED. Blinks when the controller is ready to dispense by Smart card. Glows steadily when dispensing is in progress.
  • L2 : Red LED. Glows when Tank Empty condition is sensed by the water tank float switch (floaty) connected to the controller. If the Tank Empty check is selected as “no”, then this LED will not glow.
  • K1 : Key to scroll up the menu options / setting options .
  • K3 : Key to scroll down the menu options
  • K2 : Key to return to earlier menu / home screen
  • K4: Key curser to right shift while selecting parameter values to be set. Pressing this key for few seconds, menu options are displayed for various parameter settings.
  • K5: Key to set / enter the selected parameter. Also pressing this key for few seconds, menu to “View Balance” and “Charge Card” options is displayed.

  • Can be customised according to your needs.


Download Brochure